CHOOSE YOUR PRODUCT
01 / 10 Pedals
Pedals
STEP BY STEP
- 1Identify each pedal: R (right) and L (left).
- 2Grease the thread and screw it in by hand. The left pedal has a reverse thread: it tightens counterclockwise.
- 3Tighten with a 15 mm wrench to the torque stated in the guide.
Bottle cages
STEP BY STEP · IN PREPARATION
We are preparing the step-by-step for this product. In the meantime, the PDF user guide covers the full assembly.
Jockey wheels
STEP BY STEP · IN PREPARATION
We are preparing the step-by-step for this product. In the meantime, the PDF user guide covers the full assembly.
Hanger extenders
STEP BY STEP · IN PREPARATION
We are preparing the step-by-step for this product. In the meantime, the PDF user guide covers the full assembly.
Seat post clamps
STEP BY STEP
- 1Choose the size by measuring the OUTER diameter of the frame's seat tube, not the seat post or the inside of the frame.
- 2Clean the seat post and frame. If the post is carbon, apply carbon assembly paste (not on aluminum posts).
- 3Fit the clamp with the bevelled side up, the logo readable and the slot opposite the frame's slot (bolt facing backwards).
- 4Allen model: M5×20 bolt (standard) or M5×25 (thick frames or e-bikes). Tighten with a 4 mm Allen key; without other data, do not exceed 5–6 Nm.
- 5QR model: keep the lever accessible and clear of the frame. Close it halfway, adjust the tension and close it firmly without forcing it. If the post slips, increase the tension.
- 6Check that the seat post does not move and check it again after 24 h.
Saddle
STEP BY STEP · IN PREPARATION
We are preparing the step-by-step for this product. In the meantime, the PDF user guide covers the full assembly.
Quick release skewers
STEP BY STEP · IN PREPARATION
We are preparing the step-by-step for this product. In the meantime, the PDF user guide covers the full assembly.
TPU inner tubes
STEP BY STEP · IN PREPARATION
We are preparing the step-by-step for this product. In the meantime, the PDF user guide covers the full assembly.
Multi-tools
STEP BY STEP · IN PREPARATION
We are preparing the step-by-step for this product. In the meantime, the PDF user guide covers the full assembly.
Gilets
STEP BY STEP · IN PREPARATION
We are preparing the step-by-step for this product. In the meantime, the PDF user guide covers the full assembly.
Delivery, warranty and returns
Still have questions?
Our technical team will answer you at info@impala-pro.com