A 3D printed bike saddle with medium density
The 3D printed hexagonal honeycomb spreads the pressure on your sit bones and improves blood flow. Race-saddle medium firmness: allow 3–5 rides to adapt and wear padded bib shorts.
Carbon 3D Printed Bike Saddle Ultralight 195g Medium Firmness
The IMPALAPRO carbon 3D printed bike saddle is a 195 g road and MTB saddle on a T800 carbon base, with medium-density hexagonal padding, active ventilation and pressure spread across your sit bones. Built for a sporty position on road, MTB, gravel and e-bike.
Specifications
- MATERIAL
- T800 carbon fiber + non-slip hexagonal polymer
- TECHNOLOGY
- 3D printed honeycomb structure
- FIRMNESS
- Medium
- DIMENSIONS
- 250 x 140 x 48 mm
- WEIGHT
- 195 g (±10 g per unit)
- RAILS
- T800 carbon, oval 7 x 9 mm profile
- FORE-AFT ADJUSTMENT
- 60 mm, numbered 1–5 scale
- COMPATIBLE SEAT POST
- Vertical clamp (top and bottom bolts)
- SIDE CLAMP
- Only with 7 x 9 mm adapters
- MAX. TORQUE
- 6 Nm, with a torque wrench
- USE
- Road, MTB, gravel and e-bike · sporty position
Frequently asked questions
Yes, if it uses a vertical clamp: the bolts go in from the bottom up and sandwich the rail. That's the standard on most road, MTB, gravel and e-bikes. Side-clamp seat posts need 7x9 mm adapters.
It's a medium-firmness performance saddle, not a soft leisure saddle. Your body needs 3–5 rides to adapt, and we recommend padded bib shorts for those first rides.
The hexagonal padding is medium density, with more flex than the high-firmness version and the same support for a sporty position. Dimensions and oval 7x9 mm rails are the same.
With a 5 or 6 mm Allen key (depending on your seat post) and a torque wrench, at 6 Nm maximum, tightening the bolts alternately. The clamp must sit within the rail markings. Check the torque after the first 2–3 rides.
Level. For long rides, a slight nose-down tilt (±2º) is recommended.
With a soft cloth or sponge, warm water and mild soap, every 2–3 weeks or after riding in mud or rain. No solvents, alcohol or abrasive products. Check it once a month.
Complete your machine.
Engineering designed to work together.
